[PATCH 081/102] arm64: dts: renesas: salvator-common: Add PMIC DDR Backup Power config
From: Simon Horman <hidden>
Date: 2018-05-18 11:15:43
Also in:
linux-renesas-soc
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
From: Geert Uytterhoeven <geert+renesas@glider.be> On Salvator-X(S), all of the DDR0, DDR1, DDR0C, and DDR1C power rails need to be kept powered when backup mode is enabled. Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. The accessory power switch (SW23) is a toggle switch, hence specify "rohm,rstbmode-level". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <redacted> --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 803220a02f50..96b51e572666 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi@@ -374,6 +374,8 @@ #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + rohm,ddr-backup-power = <0xf>; + rohm,rstbmode-level; regulators { dvfs: dvfs {
--
2.11.0