Thread (107 messages) 107 messages, 3 authors, 2018-06-04
STALE2972d

[PATCH 060/102] arm64: dts: renesas: condor: add eMMC support

From: Simon Horman <hidden>
Date: 2018-05-18 11:15:22
Also in: linux-renesas-soc
Subsystem: arm/risc-v/renesas architecture, the rest · Maintainers: Geert Uytterhoeven, Magnus Damm, Linus Torvalds

From: Sergei Shtylyov <redacted>

Define the Condor board dependent part of the MMC0 (connected to eMMC chip)
device node along with the necessary voltage regulators...

Signed-off-by: Sergei Shtylyov <redacted>
Signed-off-by: Simon Horman <redacted>
---
 arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 43 +++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 7af5afa41795..b8df7604dece 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -27,6 +27,24 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0 0x48000000 0 0x78000000>;
 	};
+
+	d3_3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq_vin01: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_VIN01";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &avb {
@@ -52,12 +70,37 @@
 	clock-frequency = <32768>;
 };
 
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&vddq_vin01>;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &pfc {
 	avb_pins: avb {
 		groups = "avb_mdio", "avb_rgmii";
 		function = "avb";
 	};
 
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	mmc_pins_uhs: mmc_uhs {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
-- 
2.11.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help