[PATCH v3 4/8] dt-bindings: media: rcar-vin: Add 'data-enable-active'
From: jacopo+renesas@jmondi.org (Jacopo Mondi)
Date: 2018-05-29 15:05:55
Also in:
linux-devicetree, linux-media, linux-renesas-soc
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Describe optional endpoint property 'data-enable-active' for R-Car VIN. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- v3: - new patch --- Documentation/devicetree/bindings/media/rcar_vin.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 4d91a36..ff53226 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt@@ -58,6 +58,8 @@ from local SoC CSI-2 receivers (port1) depending on SoC. - Optional properties for endpoint nodes of port at 0: - hsync-active: see [1] for description. Default is active high. - vsync-active: see [1] for description. Default is active high. + - data-enable-active: polarity of CLKENB signal, see [1] for + description. Default is active high. If both HSYNC and VSYNC polarities are not specified, embedded synchronization is selected. --
2.7.4