[PATCH 2/5] watchdog: sp805: add 'timeout-sec' DT property support
From: Ray Jui <hidden>
Date: 2018-05-22 18:47:44
Also in:
linux-devicetree, linux-watchdog, lkml
Subsystem:
the rest, watchdog device drivers · Maintainers:
Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
Add support for optional devicetree property 'timeout-sec'. 'timeout-sec' is used in the driver if specified in devicetree. Otherwise, fall back to driver default, i.e., 60 seconds Signed-off-by: Ray Jui <redacted> Reviewed-by: Scott Branden <scott.branden@broadcom.com> --- drivers/watchdog/sp805_wdt.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 03805bc..1484609 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c@@ -230,7 +230,14 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id) spin_lock_init(&wdt->lock); watchdog_set_nowayout(&wdt->wdd, nowayout); watchdog_set_drvdata(&wdt->wdd, wdt); - wdt_setload(&wdt->wdd, DEFAULT_TIMEOUT); + + /* + * If 'timeout-sec' devicetree property is specified, use that. + * Otherwise, use DEFAULT_TIMEOUT + */ + wdt->wdd.timeout = DEFAULT_TIMEOUT; + watchdog_init_timeout(&wdt->wdd, 0, &adev->dev); + wdt_setload(&wdt->wdd, wdt->wdd.timeout); ret = watchdog_register_device(&wdt->wdd); if (ret) {
--
2.1.4