Thread (24 messages) 24 messages, 3 authors, 2018-05-24

[PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding

From: horms@verge.net.au (Simon Horman)
Date: 2018-05-16 07:43:44
Also in: linux-clk, linux-crypto, linux-devicetree, linux-renesas-soc, lkml

On Tue, May 15, 2018 at 04:50:44PM +0200, Geert Uytterhoeven wrote:
Hi Gilad,

On Tue, May 15, 2018 at 2:29 PM, Gilad Ben-Yossef [off-list ref] wrote:
quoted
Add bindings for CryptoCell instance in the SoC.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Thanks for your patch!
quoted
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -528,6 +528,14 @@
                        status = "disabled";
                };

+               arm_cc630p: crypto at e6601000 {
+                       compatible = "arm,cryptocell-630p-ree";
+                       interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+                       #interrupt-cells = <2>;
I believe the #interrupt-cells property is not needed.
quoted
+                       reg = <0x0 0xe6601000 0 0x1000>;
+                       clocks = <&cpg CPG_MOD 229>;
+               };
The rest looks good, but I cannot verify the register block.
quoted
+
                i2c3: i2c at e66d0000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
Thanks, I have applied this after dropping the #interrupt-cells property.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help