From: Gabriel Matni <redacted>

Fixes missing characters on kernel console at low baud rates (i.e.9600).
The driver should poll TX_RDY or TX_FIFO_EMP instead of TX_EMP to ensure
that the transmitter holding register (THR) is ready to receive a new byte.

TX_EMP tells us when it is possible to send a break sequence via
SND_BRK_SEQ. While this also indicates that both the THR and the TSR are
empty, it does not guarantee that a new byte can be written just yet.

Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> 
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>  
Signed-off-by: Gabriel Matni <redacted> 
---
drivers/tty/serial/mvebu-uart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index a100e98259d7..f0df0640208e 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c

@@ -618,7 +618,7 @@ static void wait_for_xmitr(struct uart_port *port)
   u32 val;

   readl_poll_timeout_atomic(port->membase + UART_STAT, val,
-             (val & STAT_TX_EMP), 1, 10000);
+             (val & STAT_TX_RDY(port)), 1, 10000);

}

static void mvebu_uart_console_putchar(struct uart_port *port, int ch)
--
2.7.4