[PATCH v1 10/19] arm: dts: mt7623: remove useless property pinctrl-names at node switch@0
From: matthias.bgg@gmail.com (Matthias Brugger)
Date: 2018-03-18 23:50:07
Also in:
linux-devicetree, linux-mediatek, lkml
On 02/23/2018 11:16 AM, sean.wang at mediatek.com wrote:
From: Sean Wang <sean.wang@mediatek.com> The property pinctrl-names is totally superfluous. It would be good to remove the property to keep the node neatness. There is actually unnecessary to set up any pins for data path TRGMII between main SoC and MT7530. Furthermore, it's more reasonable for the pin setup of control path MDIO bus is being placed inside the node of ethernet controller. Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Pushed to v4.16-next/dts32 Thanks!
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 - 1 file changed, 1 deletion(-)diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 6b760be..f2d3cfb 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts@@ -151,7 +151,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - pinctrl-names = "default"; reset-gpios = <&pio 33 0>; core-supply = <&mt6323_vpa_reg>; io-supply = <&mt6323_vemc3v3_reg>;