[PATCH v1 08/19] arm: dts: mt7623: enable three available UARTs on bananapi-r2
From: matthias.bgg@gmail.com (Matthias Brugger)
Date: 2018-03-18 23:49:42
Also in:
linux-devicetree, linux-mediatek, lkml
On 02/23/2018 11:16 AM, sean.wang at mediatek.com wrote:
From: Sean Wang <sean.wang@mediatek.com> On bpi-r2 board, totally there're four UARTs which we usually called uart[0-3] helpful to extend slow-I/O devices. Among those ones, uart2 has dedicated pin slot which is used to console log. uart[0-1] appear at the 40-pins connector and uart3 has no pinout, but just has test points (TP47 for TX and TP48 for RX, respectively) nearby uart2, but we don't enable uart3 in the patch. The missing pinctrl is also being supplemented for those newly added devices. Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Pushed to v4.16-next/dts32 Thanks!
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 8ef91d6..6b760be 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts@@ -470,6 +470,13 @@ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>; }; }; + + uart2_pins_a: uart at 2 { + pins_dat { + pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>, + <MT7623_PIN_15_GPIO15_FUNC_UTXD2>; + }; + }; }; &pwm {@@ -515,16 +522,18 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; - status = "disabled"; + status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_a>; - status = "disabled"; + status = "okay"; }; &uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; status = "okay"; };