Hi Abhishek,

On 3/16/2018 4:27 PM, Abhishek Sahu wrote:

On 2018-03-16 15:08, Sricharan R wrote:

quoted

Signed-off-by: Sricharan R <redacted>
---
?arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
?1 file changed, 103 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6a838b5..81dff867 100644

--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

@@ -21,6 +21,7 @@

???? aliases {
???????? serial0 = &blsp1_uart5;
+??????? serial1 = &serial_blsp2;
???? };

???? chosen {

@@ -41,6 +42,47 @@

???????????????????? bias-disable;
???????????????? };
???????????? };
+
+???????????? i2c_0_pins: i2c_0_pinmux {
+????????????????? mux {
+?????????????????????? pins = "gpio42", "gpio43";
+?????????????????????? function = "blsp1_i2c";
+?????????????????????? drive-strength = <8>;
+?????????????????????? bias-disable;
+????????????????? };
+???????????? };
+
+???????????? spi_0_pins: spi_0_pins {
+????????????????? mux {
+?????????????????????? pins = "gpio38", "gpio39", "gpio40", "gpio41";
+?????????????????????? function = "blsp0_spi";
+?????????????????????? drive-strength = <8>;
+?????????????????????? bias-disable;
+????????????????? };
+???????????? };
+
+???????????? hsuart_pins: hsuart_pins {
+????????????????? mux {
+?????????????????????? pins = "gpio46", "gpio47", "gpio48", "gpio49";
+?????????????????????? function = "blsp2_uart";
+?????????????????????? drive-strength = <8>;
+?????????????????????? bias-disable;
+????????????????? };
+???????????? };
+
+???????????? qpic_pins: qpic_pins {
+??????????????? mux {
+?????????????????????? pins = "gpio1", "gpio3", "gpio4",
+????????????????????????? "gpio5", "gpio6", "gpio7",
+????????????????????????? "gpio8", "gpio10", "gpio11",
+????????????????????????? "gpio12", "gpio13", "gpio14",
+????????????????????????? "gpio15", "gpio16", "gpio17";
+?????????????????????? function = "qpic";
+?????????????????????? drive-strength = <8>;
+?????????????????????? bias-disable;
+????????????????? };
+??????????? };
+
???????? };

???????? serial at 78b3000 {

@@ -48,5 +90,66 @@

???????????? pinctrl-names = "default";
???????????? status = "ok";
???????? };
+
+??????? spi at 78b5000 {
+???????????? pinctrl-0 = <&spi_0_pins>;
+???????????? pinctrl-names = "default";
+???????????? status = "ok";
+
+???????????? m25p80 at 0 {
+????????????????? #address-cells = <1>;
+????????????????? #size-cells = <1>;
+????????????????? compatible = "n25q128a11", "jedec,spi-nor";
+????????????????? reg = <0>;
+????????????????? spi-max-frequency = <50000000>;
+???????????? };
+??????? };
+
+??????? serial at 78B1000 {

?s/78B1000/78b1000

?With that,
?Reviewed-by: Abhishek Sahu [off-list ref]

 ok, Thanks.

Regards,
 Sricharan

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation