---
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 83 
+++++++++++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
new file mode 100644
index 0000000..37a2ea8

--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
+	compatible = "qcom,ipq4019";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd1 at 87000000 {
+			/* Reserved for other subsystem */
+			reg = <0x87000000 0x500000>;
+			no-map;
+		};
+
+		wifi_dump at 87500000 {
+			reg = <0x87500000 0x600000>;
+			no-map;
+		};
+
+		rsvd2 at 87B00000 {
+			/* Reserved for other subsystem */
+			reg = <0x87B00000 0x500000>;
+			no-map;
+		};
+	};
+
+	soc {
+		pinctrl at 1000000 {
+			serial_0_pins: serial0_pinmux {
+				mux {
+					pins = "gpio16", "gpio17";
+					function = "blsp_uart0";
+					bias-disable;
+				};
+			};
+
+			i2c_0_pins: i2c_0_pinmux {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "blsp_i2c0";
+					bias-disable;
+				};
+			};
+		};
+
+		serial at 78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		blsp_dma: dma at 7884000 {
+			status = "ok";
+		};
+
+		i2c_0: i2c at 78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		qpic_bam: dma at 7984000 {
+			status = "ok";
+		};
+
+		nand: qpic-nand at 79b0000 {
+			status = "ok";
+		};
+	};
+};