[PATCH v5 13/36] drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the panel
From: Archit Taneja <hidden>
Date: 2018-03-14 06:14:29
Also in:
dri-devel, linux-input, linux-rockchip, linux-samsung-soc, lkml
On Saturday 10 March 2018 03:53 AM, Enric Balletbo i Serra wrote:
From: Lin Huang <redacted> When panel is shut down, we should make sure edp can be disabled to avoid undefined behavior.
Reviewed-by: Archit Taneja <redacted> Thanks, Archit
quoted hunk ↗ jump to hunk
Cc: St?phane Marchesin <redacted> Signed-off-by: Lin Huang <redacted> Signed-off-by: zain wang <redacted> Signed-off-by: Sean Paul <redacted> Signed-off-by: Thierry Escande <redacted> Reviewed-by: Andrzej Hajda <redacted> Signed-off-by: Enric Balletbo i Serra <redacted> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++++++++ 1 file changed, 11 insertions(+)diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index 92fb9a072cb6..3a222e7e46ee 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c@@ -1160,6 +1160,12 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp) pm_runtime_get_sync(dp->dev); + ret = clk_prepare_enable(dp->clock); + if (ret < 0) { + DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret); + goto out_dp_clk_pre; + } + if (dp->plat_data->power_on) dp->plat_data->power_on(dp->plat_data);@@ -1191,6 +1197,8 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp) phy_power_off(dp->phy); if (dp->plat_data->power_off) dp->plat_data->power_off(dp->plat_data); + clk_disable_unprepare(dp->clock); +out_dp_clk_pre: pm_runtime_put_sync(dp->dev); return ret;@@ -1233,11 +1241,14 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge) } disable_irq(dp->irq); + analogix_dp_set_analog_power_down(dp, POWER_ALL, 1); phy_power_off(dp->phy); if (dp->plat_data->power_off) dp->plat_data->power_off(dp->plat_data); + clk_disable_unprepare(dp->clock); + pm_runtime_put_sync(dp->dev); ret = analogix_dp_prepare_panel(dp, false, true);