[PATCH v4 13/13] iio: adc: axp20x_adc: remove !! in favor of ternary condition
From: jic23@kernel.org (Jonathan Cameron)
Date: 2018-02-24 12:20:38
Also in:
linux-devicetree, linux-iio, linux-pm, lkml
On Mon, 19 Feb 2018 13:47:36 +0100 Quentin Schulz [off-list ref] wrote:
!!'s behaviour isn't that obvious and sparse complained about it, so let's replace it with a ternary condition. Signed-off-by: Quentin Schulz <redacted>
Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan
quoted hunk ↗ jump to hunk
--- drivers/iio/adc/axp20x_adc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c index a30a972..7a745cf 100644 --- a/drivers/iio/adc/axp20x_adc.c +++ b/drivers/iio/adc/axp20x_adc.c@@ -365,7 +365,7 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, return -EINVAL; } - *val = !!(*val) * 700000; + *val = *val ? 700000 : 0; return IIO_VAL_INT; }@@ -442,15 +442,17 @@ static int axp20x_write_raw(struct iio_dev *indio_dev, if (val != 0 && val != 700000) return -EINVAL; + val = val ? 1 : 0; + switch (chan->channel) { case AXP20X_GPIO0_V: reg = AXP20X_GPIO10_IN_RANGE_GPIO0; - regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(!!val); + regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val); break; case AXP20X_GPIO1_V: reg = AXP20X_GPIO10_IN_RANGE_GPIO1; - regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(!!val); + regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val); break; default: