[PATCH v3 5/7] watchdog: mtk: allow setting timeout in devicetree
From: marcus.folkesson@gmail.com (Marcus Folkesson)
Date: 2018-02-11 20:09:35
Also in:
linux-amlogic, linux-devicetree, linux-mediatek, linux-watchdog, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, watchdog device drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
watchdog_init_timeout() will allways pick timeout_param since it defaults to a valid timeout. By following best practice described in Documentation/watchdog/watchdog-kernel-api.txt, it also let us to set timout-sec property in devicetree. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> --- Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 4 ++++ drivers/watchdog/mtk_wdt.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 5b38a30e608c..859dee167b91 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt@@ -11,9 +11,13 @@ Required properties: - reg : Specifies base physical address and size of the registers. +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example: wdt: watchdog at 10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x18>; + timeout-sec = <10>; };
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 7ed417a765c7..fcdc10ec28a3 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c@@ -57,7 +57,7 @@ #define DRV_VERSION "1.0" static bool nowayout = WATCHDOG_NOWAYOUT; -static unsigned int timeout = WDT_MAX_TIMEOUT; +static unsigned int timeout; struct mtk_wdt_dev { struct watchdog_device wdt_dev;
--
2.15.1