[PATCH 11/11] ARM: dts: sun8i: a83t: Enable HDMI on BananaPi M3
From: Jernej Skrabec <hidden>
Date: 2017-12-30 21:03:31
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
BananaPi M3 includes HDMI connector, so add support for it. Signed-off-by: Jernej Skrabec <redacted> --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 6550bf0e594b..2002d249e14c 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts@@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + reg_usb1_vbus: reg-usb1-vbus { compatible = "regulator-fixed"; regulator-name = "usb1-vbus";
@@ -82,6 +93,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay";
@@ -100,6 +115,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { rgmii_phy: ethernet-phy at 1 { compatible = "ethernet-phy-ieee802.3-c22";
@@ -306,6 +331,10 @@ regulator-name = "vcc-ephy"; }; +&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>;
--
2.15.1