[PATCH 01/11] clk: sunxi-ng: Don't set k if width is 0 for nkmp plls
From: Jernej Skrabec <hidden>
Date: 2017-12-30 21:02:23
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
arm/allwinner sunxi soc support, common clk framework, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Michael Turquette, Stephen Boyd, Linus Torvalds
For example, A83T have nmp plls which are modelled as nkmp plls. Since k is not specified, it has offset 0, shift 0 and lowest value 1. This means that LSB bit is always set to 1, which may change clock rate. Fix that by applying k factor only if k width is greater than 0. Signed-off-by: Jernej Skrabec <redacted> --- drivers/clk/sunxi-ng/ccu_nkmp.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index e58c95787f94..709f528af2b3 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c@@ -81,7 +81,7 @@ static unsigned long ccu_nkmp_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw); - unsigned long n, m, k, p; + unsigned long n, m, k = 1, p; u32 reg; reg = readl(nkmp->common.base + nkmp->common.reg);
@@ -92,11 +92,13 @@ static unsigned long ccu_nkmp_recalc_rate(struct clk_hw *hw, if (!n) n++; - k = reg >> nkmp->k.shift; - k &= (1 << nkmp->k.width) - 1; - k += nkmp->k.offset; - if (!k) - k++; + if (nkmp->k.width) { + k = reg >> nkmp->k.shift; + k &= (1 << nkmp->k.width) - 1; + k += nkmp->k.offset; + if (!k) + k++; + } m = reg >> nkmp->m.shift; m &= (1 << nkmp->m.width) - 1;
@@ -153,12 +155,15 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate, reg = readl(nkmp->common.base + nkmp->common.reg); reg &= ~GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift); - reg &= ~GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift); + if (nkmp->k.width) + reg &= ~GENMASK(nkmp->k.width + nkmp->k.shift - 1, + nkmp->k.shift); reg &= ~GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift); reg &= ~GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift); reg |= (_nkmp.n - nkmp->n.offset) << nkmp->n.shift; - reg |= (_nkmp.k - nkmp->k.offset) << nkmp->k.shift; + if (nkmp->k.width) + reg |= (_nkmp.k - nkmp->k.offset) << nkmp->k.shift; reg |= (_nkmp.m - nkmp->m.offset) << nkmp->m.shift; reg |= ilog2(_nkmp.p) << nkmp->p.shift;
--
2.15.1