[PATCH v5 0/4] ARM: ep93xx: ts72xx: Add support for BK3 board

On Wed, Dec 20, 2017 at 2:00 PM, Alexander Sverdlin
[off-list ref] wrote:

Hi!

On Wed Dec 20 13:50:28 2017 Arnd Bergmann [off-list ref] wrote:

quoted

I'm generally more interested in the multiplatform conversion than
the DT conversion, and I think converting this one to multiplatform
isn't actually that hard, and doesn't have a significant risk for
regressions, the main work is to convert the clock handling.

If it will be still possible to build the binary kernel of the same size after the
conversion, I'm in for testing, otherwise it will not fit into Flash any more...

I think there is an increase in code size that comes mainly from the
common clock layer itself, plus a few bytes here and there. Obviously
the increase is much bigger if you actually enable multiple platforms.

Here is the size of the uncompressed vmlinux file with the current
clk implementation, compared to a build with a build containing the
common clk code but no clock driver, and the separate clock
implementation we have today:

   text    data     bss     dec     hex filename
4752655 1036028 128260 5916943 5a490f build/tmp/vmlinux-old-clk
4780174 1040524 128284 5948982 5ac636 build/tmp/vmlinux-common-clk
   2491    1700       0    4191    105f build/tmp/arch/arm/mach-ep93xx/clock.o

The difference would come to about 0.7% of the current image size,
I guess around 1% when the other changes are included. Is that within
the margins you have, or is this already critical?

       Arnd