On Thu, Nov 30, 2017 at 6:14 PM,  [off-list ref] wrote:

+&ecspi3 {
+       fsl,spi-num-chipselects = <1>;

Please remove this property. It is no longer used.

+       dvicape at 39 {
+               compatible = "sil164_simple";

This compatible string does not exist.

+&lcdif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_lcdif_dat
+                    &pinctrl_lcdif_ctrl>;
+       display = <&display0>;
+       status = "okay";
+
+       display0: display {
+               bits-per-pixel = <24>;
+               bus-width = <24>;
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: dvi {
+                               /* 1024x768p60 */
+                               clock-frequency = <65000000>;
+                               hactive = <1024>;
+                               hfront-porch = <40>;
+                               hback-porch = <220>;
+                               hsync-len = <60>;
+                               vactive = <768>;
+                               vfront-porch = <7>;
+                               vback-porch = <21>;
+                               vsync-len = <10>;
+
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <0>;

Which panel is this? Could you use a simple panel driver compatible
string instead?

+                       };
+               };
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+       assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+       fsl,uart-has-rtscts;

Please use 'uart-has-rtscts' instead.

+       status = "okay";
+};
+
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+       assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+       fsl,uart-has-rtscts;

Ditto.

+       status = "okay";
+};
+
+&uart7 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart7>;
+       assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+       assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+       fsl,uart-has-rtscts;

Ditto