[PATCH V2 04/29] ata: deprecate pci_get_bus_and_slot()
From: Sinan Kaya <hidden>
Date: 2017-11-22 22:57:38
Also in:
linux-arm-msm, linux-ide, linux-pci, lkml
Subsystem:
libata subsystem (serial and parallel ata drivers), the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Linus Torvalds
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Use pci_get_domain_bus_and_slot() and extract the actual domain number from the pdev passed in. Signed-off-by: Sinan Kaya <redacted> --- drivers/ata/pata_ali.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index d19cd88..0b122f9 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c@@ -466,7 +466,8 @@ static void ali_init_chipset(struct pci_dev *pdev) tmp |= 0x01; /* CD_ROM enable for DMA */ pci_write_config_byte(pdev, 0x53, tmp); } - north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); + north = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 0, + PCI_DEVFN(0, 0)); if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) { /* Configure the ALi bridge logic. For non ALi rely on BIOS. Set the south bridge enable bit */
--
1.9.1