[PATCH 5/8] ARM: dts: aspeed-palmetto: Add I2C devices

[PATCH 0/8] ARM: dts: aspeed: Device tree updates · Joel Stanley <joel@jms.id.au> · 2017-09-28
[PATCH 1/8] ARM: dts: aspeed: Move pinctrl subnodes to improve readability · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 1/8] ARM: dts: aspeed: Move pinctrl subnodes to improve readability · Andrew Jeffery <hidden> · 2017-10-04
[PATCH 2/8] ARM: dts: aspeed: Reorder ADC node · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 2/8] ARM: dts: aspeed: Reorder ADC node · Andrew Jeffery <hidden> · 2017-10-04
Re: [PATCH 2/8] ARM: dts: aspeed: Reorder ADC node · Joel Stanley <joel@jms.id.au> · 2017-10-04
Re: [PATCH 2/8] ARM: dts: aspeed: Reorder ADC node · Andrew Jeffery <hidden> · 2017-10-04
[PATCH 3/8] ARM: dts: aspeed: Add I2C buses · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 3/8] ARM: dts: aspeed: Add I2C buses · Brendan Higgins <hidden> · 2017-09-28
Re: [PATCH 3/8] ARM: dts: aspeed: Add I2C buses · Andrew Jeffery <hidden> · 2017-10-04
Re: [PATCH 3/8] ARM: dts: aspeed: Add I2C buses · Andrew Jeffery <hidden> · 2017-10-04
[PATCH 4/8] ARM: dts: aspeed-romulus: Add I2C devices · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 4/8] ARM: dts: aspeed-romulus: Add I2C devices · Brendan Higgins <hidden> · 2017-09-28
Re: [PATCH 4/8] ARM: dts: aspeed-romulus: Add I2C devices · Andrew Jeffery <hidden> · 2017-10-04
Re: [PATCH 4/8] ARM: dts: aspeed-romulus: Add I2C devices · Joel Stanley <joel@jms.id.au> · 2017-10-04
[PATCH 5/8] ARM: dts: aspeed-palmetto: Add I2C devices · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 5/8] ARM: dts: aspeed-palmetto: Add I2C devices · Brendan Higgins <hidden> · 2017-09-28
Re: [PATCH 5/8] ARM: dts: aspeed-palmetto: Add I2C devices · Andrew Jeffery <hidden> · 2017-10-04
[PATCH 6/8] ARM: dts: aspeed-ast2500: Add I2C devices · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 6/8] ARM: dts: aspeed-ast2500: Add I2C devices · Brendan Higgins <hidden> · 2017-09-28
Re: [PATCH 6/8] ARM: dts: aspeed-ast2500: Add I2C devices · Andrew Jeffery <hidden> · 2017-10-04
[PATCH 7/8] ARM: dts: aspeed: Add aliases for UARTs · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 7/8] ARM: dts: aspeed: Add aliases for UARTs · Andrew Jeffery <hidden> · 2017-10-04
[PATCH 8/8] ARM: dts: aspeed: Clean up UART nodes · Joel Stanley <joel@jms.id.au> · 2017-09-28
Re: [PATCH 8/8] ARM: dts: aspeed: Clean up UART nodes · Andrew Jeffery <hidden> · 2017-10-04
Re: [PATCH 8/8] ARM: dts: aspeed: Clean up UART nodes · Joel Stanley <joel@jms.id.au> · 2017-10-04

From: Brendan Higgins <hidden>
Date: 2017-09-28 18:36:59
Also in: linux-aspeed, linux-devicetree, lkml

On Thu, Sep 28, 2017 at 12:51 AM, Joel Stanley [off-list ref] wrote:

Enable the buses that are in use and the devices that are attached.
Currently that includes the battery backed RTC, temperature measurement
and EEPROM.

Some of these buses are for hotplugged cards, such as PCIe cards.
Others do not yet have upstream drivers, so there are no devices
attached.

Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Brendan Higgins <redacted>

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help