[PATCH v2 04/12] ARM: dts: nanopi: Fix node with unit name and no reg property
From: clabbe.montjoie@gmail.com (Corentin Labbe)
Date: 2017-09-22 18:45:55
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch fix the warning "xxx has a unit name, but no reg property" by removing "@0" from such node. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Maxime Ripard <redacted> --- arch/arm/boot/dts/sun8i-h3-nanopi.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index c6decee41a27..7646e331bd29 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi@@ -81,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sw_r_npi>; - k1 at 0 { + k1 { label = "k1"; linux,code = <KEY_POWER>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -108,19 +108,19 @@ }; &pio { - leds_npi: led_pins at 0 { + leds_npi: led_pins { pins = "PA10"; function = "gpio_out"; }; }; &r_pio { - leds_r_npi: led_pins at 0 { + leds_r_npi: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_npi: key_pins at 0 { + sw_r_npi: key_pins { pins = "PL3"; function = "gpio_in"; };
--
2.13.5