[PATCH v2 03/12] ARM: dts: sunxi: h3/h5: Fix node with unit name and no reg property
From: clabbe.montjoie@gmail.com (Corentin Labbe)
Date: 2017-09-22 18:45:58
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch fix the warning "xxx has a unit name, but no reg property" by removing "@0" from such node. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Maxime Ripard <redacted> --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 289f2cd06dfe..2e4bae988acd 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi@@ -322,7 +322,7 @@ function = "i2c2"; }; - mmc0_pins_a: mmc0 at 0 { + mmc0_pins_a: mmc0 { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0";
@@ -330,13 +330,13 @@ bias-pull-up; }; - mmc0_cd_pin: mmc0_cd_pin at 0 { + mmc0_cd_pin: mmc0_cd_pin { pins = "PF6"; function = "gpio_in"; bias-pull-up; }; - mmc1_pins_a: mmc1 at 0 { + mmc1_pins_a: mmc1 { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1";
@@ -354,7 +354,7 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif at 0 { + spdif_tx_pins_a: spdif { pins = "PA17"; function = "spdif"; };
@@ -369,7 +369,7 @@ function = "spi1"; }; - uart0_pins_a: uart0 at 0 { + uart0_pins_a: uart0 { pins = "PA4", "PA5"; function = "uart0"; };
@@ -697,7 +697,7 @@ interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir at 0 { + ir_pins_a: ir { pins = "PL11"; function = "s_cir_rx"; };
--
2.13.5