[PATCH v3 5/6] serial: imx: update the stop rx,tx procedures
From: martyn.welch@collabora.co.uk (Martyn Welch)
Date: 2017-09-21 16:18:44
Also in:
linux-serial, lkml
Subsystem:
the rest, tty layer and serial drivers · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
From: Nandor Han <redacted>
According to "Documentation/serial/driver" both procedures should stop
receiving or sending data. Based on this the procedures should stop the
activity regardless if DMA is enabled or not.
This commit updates both imx_stop_{rx|tx} procedures to stop the
activity and disable the interrupts related to that.
Signed-off-by: Nandor Han <redacted>
Signed-off-by: Romain Perier <redacted>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
---
drivers/tty/serial/imx.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index ed02783..256b128 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c@@ -388,15 +388,14 @@ static void imx_stop_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - /* - * We are maybe in the SMP context, so if the DMA TX thread is running - * on other cpu, we have to wait for it to finish. - */ - if (sport->dma_is_enabled && sport->dma_is_txing) - return; + sport->tx_bytes = 0; + + if (sport->dma_is_enabled) + imx_stop_tx_dma(sport); temp = readl(port->membase + UCR1); - writel(temp & ~UCR1_TXMPTYEN, port->membase + UCR1); + temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN | UCR1_RTSDEN); + writel(temp, port->membase + UCR1); /* in rs485 mode disable transmitter if shifter is empty */ if (port->rs485.flags & SER_RS485_ENABLED &&
@@ -423,21 +422,20 @@ static void imx_stop_rx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - if (sport->dma_is_enabled && sport->dma_is_rxing) { - if (sport->port.suspended) { - dmaengine_terminate_all(sport->dma_chan_rx); - sport->dma_is_rxing = 0; - } else { - return; - } - } + if (sport->dma_is_enabled) + imx_stop_rx_dma(sport); + + temp = readl(sport->port.membase + UCR1); + temp &= ~UCR1_RRDYEN; + writel(temp, sport->port.membase + UCR1); temp = readl(sport->port.membase + UCR2); - writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2); + temp &= ~UCR2_ATEN; + writel(temp, sport->port.membase + UCR2); - /* disable the `Receiver Ready Interrrupt` */ - temp = readl(sport->port.membase + UCR1); - writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1); + temp = readl(sport->port.membase + UCR3); + temp &= ~UCR3_AWAKEN; + writel(temp, sport->port.membase + UCR3); } /*
--
1.8.3.1