[PATCH v2 10/10] arm64: allwinner: a64: add dma controller references to spi nodes
From: Stefan Brüns <hidden>
Date: 2017-09-17 03:20:45
Also in:
linux-devicetree, lkml
Subsystem:
arm/allwinner sunxi soc support, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds
The spi controller nodes omit the dma controller/channel references, add it. This does not yet enable DMA for SPI transfers, as the spi-sun6i driver lacks support for DMA, but always uses PIO to the FIFO. Signed-off-by: Stefan Br?ns <redacted> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 4f060ecdb061..ec71c48b393d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi@@ -476,6 +476,8 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; resets = <&ccu RST_BUS_SPI0>;
@@ -491,6 +493,8 @@ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins>; resets = <&ccu RST_BUS_SPI1>;
--
2.14.1