[PATCH 10/10] arm64: dts: r8a7796: Use R-Car GPIO Gen3 fallback compat string
From: Simon Horman <hidden>
Date: 2017-08-08 08:39:28
Also in:
linux-renesas-soc
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
Use newly added R-Car GPIO Gen3 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7796 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <redacted> --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index ef1120f4e561..1f945720f761 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi@@ -214,7 +214,7 @@ gpio0: gpio at e6050000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
@@ -229,7 +229,7 @@ gpio1: gpio at e6051000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
@@ -244,7 +244,7 @@ gpio2: gpio at e6052000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
@@ -259,7 +259,7 @@ gpio3: gpio at e6053000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
@@ -274,7 +274,7 @@ gpio4: gpio at e6054000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
@@ -289,7 +289,7 @@ gpio5: gpio at e6055000 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
@@ -304,7 +304,7 @@ gpio6: gpio at e6055400 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
@@ -319,7 +319,7 @@ gpio7: gpio at e6055800 { compatible = "renesas,gpio-r8a7796", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055800 0 0x50>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>;
--
2.1.4