[PATCH v2 2/3] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI)
From: yong.deng@magewell.com (Yong Deng)
Date: 2017-07-27 05:03:38
Also in:
linux-devicetree, linux-media, lkml
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add binding documentation for Allwinner V3s CSI. Signed-off-by: Yong Deng <yong.deng@magewell.com> --- .../devicetree/bindings/media/sun6i-csi.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
new file mode 100644
index 0000000..f8d83f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt@@ -0,0 +1,49 @@ +Allwinner V3s Camera Sensor Interface +------------------------------ + +Required properties: + - compatible: value must be "allwinner,sun8i-v3s-csi" + - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the CSI + * ahb: the CSI interface clock + * mod: the CSI module clock + * ram: the CSI DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset line driving the CSI + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + csi1: csi at 01cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + data-shift = <0>; + + /* If hsync-active/vsync-active are missing, + embedded BT.656 sync is used */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; +
--
1.8.3.1