[PATCH] arm64: dts: ls1012a: add USB host controller nodes

On Thu, Jul 13, 2017 at 08:46:50AM +0000, Ran Wang wrote:

quoted

quoted

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi

b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b497ac1..8aa2dcf 100644

--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi

@@ -411,6 +411,23 @@
 				 <&clockgen 4 3>;
 		};

+		usb0: usb3 at 2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb1: usb2 at 8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <0 139 0x4>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};

Please keep the nodes sorted in unit-address.

Shawn

Do you mean to move the node 'usb1: usb2 at 8600000' forward to where it's address is just before  '@8600000 '?
I think it's reasonable to put USB controller nodes together in DTS for developer to do issue analysis.

The nodes under simple-bus are maintained in order of unit-address.
Please respect that.

usb2 at 8600000 should go after sata at 3200000 with the current nodes.

Shawn

quoted

quoted

+
 		sata: sata at 3200000 {
 			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>,
--
2.1.0.27.g96db324