[PATCH 5/8] dt-bindings: iio: Add STM32 LPTimer trigger binding
From: Fabrice Gasnier <hidden>
Date: 2017-06-16 16:00:52
Also in:
linux-devicetree, linux-iio, linux-pwm, lkml
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, stm32 timer/lptimer drivers, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Fabrice Gasnier, Linus Torvalds
Add documentation for STMicroelectronics STM32 Low Power Timer trigger binding. Signed-off-by: Fabrice Gasnier <redacted> --- .../bindings/iio/timer/stm32-lptimer-trigger.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt
new file mode 100644
index 0000000..6ece007
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/timer/stm32-lptimer-trigger.txt@@ -0,0 +1,21 @@ +STMicroelectronics STM32 Low Power Timer trigger + +STM32 LP Timer provides trigger source (LPTIM output) that can be used +by STM32 internal ADC and/or DAC. + +Must be a sub-node of an STM32 LP Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-trigger". +- reg: Identify trigger hardware block. + +Example: + lptimer1: lptimer at 0x40002400 { + compatible = "st,stm32-lptimer"; + ... + trigger at 0 { + compatible = "st,stm32-lptimer-trigger"; + reg = <0>; + }; + };
--
1.9.1