[PATCH v2] phy: meson8b-usb2: fix offsets for some of the registers
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
Date: 2017-03-24 19:19:32
Also in:
linux-amlogic
Hi Kishon, On Sat, Mar 4, 2017 at 11:20 AM, Martin Blumenstingl [off-list ref] wrote:
The register offsets for REG_DBG_UART (and all following) were off by 0x4. This was not a problem yet because these registers are currently not used by the driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
gentle ping - please let me know if something is missing (for example some ACK orreview) before you are going to apply this
quoted hunk ↗ jump to hunk
--- changes since v1: - added Jerome's Reviewed-By drivers/phy/phy-meson8b-usb2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/phy-meson8b-usb2.c index 33c9f4ba157d..30f56a6a411f 100644 --- a/drivers/phy/phy-meson8b-usb2.c +++ b/drivers/phy/phy-meson8b-usb2.c@@ -81,9 +81,9 @@ #define REG_ADP_BC_ACA_PIN_GND BIT(25) #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26) -#define REG_DBG_UART 0x14 +#define REG_DBG_UART 0x10 -#define REG_TEST 0x18 +#define REG_TEST 0x14 #define REG_TEST_DATA_IN_MASK GENMASK(3, 0) #define REG_TEST_EN_MASK GENMASK(7, 4) #define REG_TEST_ADDR_MASK GENMASK(11, 8)@@ -93,7 +93,7 @@ #define REG_TEST_DATA_OUT_MASK GENMASK(19, 16) #define REG_TEST_DISABLE_ID_PULLUP BIT(20) -#define REG_TUNE 0x1c +#define REG_TUNE 0x18 #define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0) #define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2) #define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4) --2.12.0
Regards, Martin