[PATCH v2 3/8] ARM: OMAP5: Thermal: Add slope and offset values
From: edubezval@gmail.com (Eduardo Valentin)
Date: 2017-03-29 04:33:17
Also in:
linux-omap, linux-pm, lkml
On Thu, Mar 09, 2017 at 01:35:57PM +0530, Keerthy wrote:
Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing.
The patch is fine.. but
quoted hunk ↗ jump to hunk
Signed-off-by: Keerthy <j-keerthy@ti.com> --- arch/arm/boot/dts/omap5.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 222155c..eaff2a5 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi@@ -1127,6 +1127,15 @@ &cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <65 (-1791)>;
I suppose you tried this change with this patch: https://patchwork.kernel.org/patch/9619577/ ? Otherwise, I do not see how your coeff would work, right?
};
/include/ "omap54xx-clocks.dtsi"
+
+&gpu_thermal {
+ coefficients = <117 (-2992)>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
--
1.9.1