On Friday 24 March 2017 02:22 AM, Tony Lindgren wrote:

* Keerthy [off-list ref] [170321 20:45]:

quoted

On Thursday 09 March 2017 01:35 PM, Keerthy wrote:

quoted

Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.

Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 

Hi Eduardo,

If the series looks okay could you please pull this?

Also.. Are the dts changes safe for me to pick separately?

Yes Tony they are safe to pulled separately.

Regards,

Tony

quoted

quoted

Changes in v2:

  * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.

Keerthy (8):
  arm: dts: omap3: Add cpu_thermal zone
  ARM: DRA7: Thermal: Add slope and offset values
  ARM: OMAP5: Thermal: Add slope and offset values
  ARM: OMAP443x: Thermal: Add slope and offset values
  ARM: OMAP4460: Thermal: Add slope and offset values
  thermal: ti-soc-thermal: Fetch slope and offset from DT
  thermal: ti-soc-thermal: Remove redundant constants
  thermal: ti-soc-thermal: Remove redundant code

 arch/arm/boot/dts/dra7.dtsi                        |  17 +++
 arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
 arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
 arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
 arch/arm/boot/dts/omap443x.dtsi                    |   4 +
 arch/arm/boot/dts/omap4460.dtsi                    |   4 +
 arch/arm/boot/dts/omap5.dtsi                       |   9 ++
 .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
 .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
 .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
 .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
 drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
 drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
 14 files changed, 71 insertions(+), 201 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi