[PATCH 1/7] ARM: DRA7: Thermal: Add slope and offset values
From: j-keerthy@ti.com (Keerthy)
Date: 2017-03-01 11:01:16
Also in:
linux-omap, linux-pm, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing. Signed-off-by: Keerthy <j-keerthy@ti.com> --- arch/arm/boot/dts/dra7.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 2c9e56f..10e09dc 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi@@ -1982,6 +1982,23 @@ &cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <0 2000>; +}; + +&gpu_thermal { + coefficients = <0 2000>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; + +&dspeve_thermal { + coefficients = <0 2000>; +}; + +&iva_thermal { + coefficients = <0 2000>; }; /include/ "dra7xx-clocks.dtsi"
--
1.9.1