[STLinux Kernel] [PATCH v2 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control
From: peter.griffin@linaro.org (Peter Griffin)
Date: 2017-02-01 14:53:54
Also in:
linux-devicetree, linux-serial, lkml
On Wed, 01 Feb 2017, Lee Jones wrote:
Hardware flow-control capability must be specified at a platform
level in order to inform the ASC driver that the platform is capable
(i.e. are the lines wired up, etc). STiH4{07,10} devices are indeed
capable, so let's provide the property.
Signed-off-by: Lee Jones <redacted>Acked-by: Peter Griffin <peter.griffin@linaro.org>
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/stih410-b2260.dts | 1 + 1 file changed, 1 insertion(+)diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index cbcbcb4..93c14d1 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts@@ -66,6 +66,7 @@ pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>; pinctrl-1 = <&pinctrl_serial0>; rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; };