[PATCH v2 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups
From: Lee Jones <hidden>
Date: 2017-02-01 14:32:21
Also in:
linux-devicetree, linux-serial, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Having just defined some new Pinctrl groups for when HW flow-control
is {en,dis}abled, let's reference them for use within the driver.
Signed-off-by: Lee Jones <redacted>
---
arch/arm/boot/dts/stih407-family.dtsi | 3 +--
arch/arm/boot/dts/stih410-b2260.dts | 5 ++++-
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c8b2944..e480e32 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi@@ -222,9 +222,8 @@ compatible = "st,asc"; reg = <0x9830000 0x2c>; interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial0>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + /* Pinctrl moved out to a per-board configuration */ status = "disabled"; };
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index fa16aba..cbcbcb4 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts@@ -62,8 +62,11 @@ /* Low speed expansion connector */ uart0: serial at 9830000 { label = "LS-UART0"; - status = "okay"; + pinctrl-names = "default", "no-hw-flowctrl"; + pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>; + pinctrl-1 = <&pinctrl_serial0>; rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>; + status = "okay"; }; /* Low speed expansion connector */
--
2.9.3