[PATCHv9 6/6] dmaengine: rcar-dmac: add iommu support for slave transfers

Hi Niklas,

On Monday 05 Sep 2016 12:52:44 Laurent Pinchart wrote:

On Wednesday 10 Aug 2016 13:22:19 Niklas S?derlund wrote:

quoted

Enable slave transfers to a device behind a IPMMU by mapping the slave
addresses using the dma-mapping API.

Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/dma/sh/rcar-dmac.c | 82 ++++++++++++++++++++++++++++++++++++-----
1 file changed, 74 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index cf983a9..22a5e40 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c

[snip]

quoted

+static int rcar_dmac_map_slave_addr(struct dma_chan *chan,
+				    enum dma_transfer_direction dir)
+{
+	struct rcar_dmac_chan *rchan = to_rcar_dmac_chan(chan);
+	struct rcar_dmac_chan_map *map = &rchan->map;
+	phys_addr_t dev_addr;
+	size_t dev_size;
+	enum dma_data_direction dev_dir;
+
+	if (dir == DMA_DEV_TO_MEM) {
+		dev_addr = rchan->src.slave_addr;
+		dev_size = rchan->src.xfer_size;
+		dev_dir = DMA_TO_DEVICE;

Shouldn't this be DMA_FROM_DEVICE, and DMA_TO_DEVICE below ?

This comment can be ignored (thank you Robin for the explanation), but ...

quoted

+	} else {
+		dev_addr = rchan->dst.slave_addr;
+		dev_size = rchan->dst.xfer_size;
+		dev_dir = DMA_FROM_DEVICE;
+	}
+
+	/* Reuse current map if possible. */
+	if (dev_addr == map->slave.slave_addr &&
+	    dev_size == map->slave.xfer_size &&
+	    dev_dir == map->dir)
+		return 0;
+
+	/* Remove old mapping if present. */
+	if (map->slave.xfer_size)
+		dma_unmap_resource(chan->device->dev, map->addr,
+				   map->slave.xfer_size, map->dir, 0);

Unless I'm mistaken the resource will not be unmapped when freeing channel
resources, will it ?

I believe this one still needs to be addressed.

quoted

+	map->slave.xfer_size = 0;
+
+	/* Create new slave address map. */
+	map->addr = dma_map_resource(chan->device->dev, dev_addr, dev_size,
+				     dev_dir, 0);
+
+	if (dma_mapping_error(chan->device->dev, map->addr)) {
+		dev_err(chan->device->dev,
+			"chan%u: failed to map %zx@%pap", rchan->index,
+			dev_size, &dev_addr);
+		return -EIO;
+	}
+
+	dev_dbg(chan->device->dev, "chan%u: map %zx@%pap to %pad dir: %s\n",
+		rchan->index, dev_size, &dev_addr, &map->addr,

quoted

+		dev_dir == DMA_TO_DEVICE ? "DMA_TO_DEVICE" :

"DMA_FROM_DEVICE");

quoted

+
+	map->slave.slave_addr = dev_addr;
+	map->slave.xfer_size = dev_size;
+	map->dir = dev_dir;
+
+	return 0;
+}

[snip]

-- 
Regards,

Laurent Pinchart