[PATCH v3 16/24] drm/rockchip: dw-mipi-dsi: properly configure PHY timing
From: Sean Paul <hidden>
Date: 2017-01-30 21:58:27
Also in:
dri-devel, linux-rockchip, lkml
On Sun, Jan 29, 2017 at 01:24:36PM +0000, John Keeping wrote:
quoted hunk ↗ jump to hunk
These values are specified as constant time periods but the PHY configuration is in terms of the current lane byte clock so using constant values guarantees that the timings will be outside the specification with some display configurations. Derive the necessary configuration from the byte clock in order to ensure that the PHY configuration is correct. Signed-off-by: John Keeping <redacted> --- v3: - Wrap some long lines Unchanged in v2 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 39 ++++++++++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 4 deletions(-)diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index cfe7e4ba305c..85edf6dd2bac 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c@@ -383,6 +383,26 @@ static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code, dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); } +/** + * ns2bc - Nanoseconds to byte clock cycles + */ +static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns) +{ + unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC / 8;
Why multiply by 1000 (MSEC_PER_SEC) only to immediately divide by 1000?
+ + return (ns * (byte_clk_khz / 1000) + 999) / 1000;
Can you replace this whole function with: return DIV_ROUND_UP(ns * dsi->lane_mbps / 8, 1000);
+}
+
+/**
+ * ns2ui - Nanoseconds to UI time periods
+ */
+static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns)
+{
+ unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC;
+
+ return (ns * (byte_clk_khz / 1000) + 999) / 1000;Same remarks here. Sean
quoted hunk ↗ jump to hunk
+} + static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) { int ret, testdin, vco, val;@@ -434,10 +454,21 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) SETRD_MAX | POWER_MANAGE | TER_RESISTORS_ON); - - dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | 0xf); - dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | 0x55); - dw_mipi_dsi_phy_write(dsi, 0x72, THS_ZERO_PROGRAM_EN | 0xa); + dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500)); + dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40)); + dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300)); + dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100)); + dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100)); + dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7)); + + dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500)); + dw_mipi_dsi_phy_write(dsi, 0x71, + THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5)); + dw_mipi_dsi_phy_write(dsi, 0x72, + THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2)); + dw_mipi_dsi_phy_write(dsi, 0x73, + THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8)); + dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100)); dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK | PHY_UNRSTZ | PHY_UNSHUTDOWNZ);-- 2.11.0.197.gb556de5.dirty _______________________________________________ dri-devel mailing list dri-devel at lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- Sean Paul, Software Engineer, Google / Chromium OS