[PATCH v3 11/24] drm/rockchip: dw-mipi-dsi: prepare panel after phy init
From: John Keeping <hidden>
Date: 2017-01-29 14:47:35
Also in:
dri-devel, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, drm drivers, drm drivers and misc gpu patches, drm drivers for rockchip, the rest · Maintainers:
Heiko Stuebner, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Sandy Huang, Heiko Stübner, Andy Yan, Linus Torvalds
Some panels need to be configured with commands sent over the MIPI link, which they will do in the prepare hook. Call this after the PHY has been initialized so that we are able to send commands to the panel. Signed-off-by: John Keeping <redacted> Reviewed-by: Chris Zhong <redacted> --- v3: - Add Chris' Reviewed-by Unchanged in v2 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index ddbc037e7ced..7ada6d8ed143 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c@@ -896,12 +896,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) dw_mipi_dsi_dphy_timing_config(dsi); dw_mipi_dsi_dphy_interface_config(dsi); dw_mipi_dsi_clear_err(dsi); - if (drm_panel_prepare(dsi->panel)) - dev_err(dsi->dev, "failed to prepare panel\n"); dw_mipi_dsi_phy_init(dsi); dw_mipi_dsi_wait_for_two_frames(mode); + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); + if (drm_panel_prepare(dsi->panel)) + dev_err(dsi->dev, "failed to prepare panel\n"); + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); drm_panel_enable(dsi->panel);
--
2.11.0.197.gb556de5.dirty