[PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
From: david@lechnology.com (David Lechner)
Date: 2017-01-17 18:54:02
Also in:
linux-devicetree, linux-ide, lkml
On 01/17/2017 06:26 AM, Bartosz Golaszewski wrote:
Enable the SATA node for da850-lcdk. We omit the pinctrl property on purpose - the muxed SATA pins are not hooked up to anything SATA-related on the lcdk. The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of 15 for 1.5GHz PLL rate.
The multiplier is no longer in device tree, so this comment is not necessary.
quoted hunk ↗ jump to hunk
Signed-off-by: Bartosz Golaszewski <redacted> --- arch/arm/boot/dts/da850-lcdk.dts | 4 ++++ 1 file changed, 4 insertions(+)diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..fbeee3c 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts@@ -105,6 +105,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &mdio { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>;