[PATCH v2 01/14] devicetree: bindings: add bindings for ahci-da850
From: david@lechnology.com (David Lechner)
Date: 2017-01-17 18:35:34
Also in:
linux-devicetree, linux-ide, lkml
On 01/17/2017 06:26 AM, Bartosz Golaszewski wrote:
quoted hunk ↗ jump to hunk
Add DT bindings for the TI DA850 AHCI SATA controller. Signed-off-by: Bartosz Golaszewski <redacted> --- Documentation/devicetree/bindings/ata/ahci-da850.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txtdiff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt new file mode 100644 index 0000000..e7111b4 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt@@ -0,0 +1,18 @@ +Device tree binding for the TI DA850 AHCI SATA Controller +--------------------------------------------------------- + +Required properties: + - compatible: must be "ti,da850-ahci" + - reg: physical base addresses and sizes of the controller's register areas + - interrupts: interrupt specifier (refer to the interrupt binding) + +Optional properties: + - clocks: clock specifier (refer to the common clock binding)
Won't you also need a clock-names property since there are two clocks?
+
+Example:
+
+ sata: ahci at 218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ };It would be nice to have clocks and clock-names in the example as well.