Thread (13 messages) 13 messages, 4 authors, 2017-01-11
STALE3443d
Revisions (3)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]

[PATCH 1/2] Documentation: devicetree: Add document bindings for mtk-cir

From: sean.wang@mediatek.com (sean.wang at mediatek.com)
Date: 2017-01-05 16:08:23
Also in: linux-devicetree, linux-media, linux-mediatek, lkml
Subsystem: media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

From: Sean Wang <sean.wang@mediatek.com>

This patch adds documentation for devicetree bindings for
Mediatek IR controller.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../devicetree/bindings/media/mtk-cir.txt          | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 linux-4.8.rc1_p0/Documentation/devicetree/bindings/media/mtk-cir.txt
diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt b/Documentation/devicetree/bindings/media/mtk-cir.txt
new file mode 100644
index 0000000..bbedd71
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mtk-cir.txt
@@ -0,0 +1,23 @@
+Device-Tree bindings for Mediatek IR controller found in Mediatek SoC family
+
+Required properties:
+- compatible	    : "mediatek,mt7623-ir"
+- clocks	    : list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : should contain "clk" entries;
+- interrupts	    : should contain IR IRQ number;
+- reg		    : should contain IO map address for IR.
+
+Optional properties:
+- linux,rc-map-name : Remote control map name.
+
+Example:
+
+cir: cir at 0x10013000 {
+	compatible = "mediatek,mt7623-ir";
+	reg = <0 0x10013000 0 0x1000>;
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&infracfg CLK_INFRA_IRRX>;
+	clock-names = "clk";
+	linux,rc-map-name = "rc-rc6-mce";
+};
-- 
1.9.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help