On Tue, Dec 13, 2016 at 06:48:29PM +0100, Gregory CLEMENT wrote:

This the forth version of the series adding support for the SDHCI
Xenon controller. It can be currently found on the Armada 37xx and the
Armada 7K/8K but will be also used in more Marvell SoC (and not only
the mvebu ones actually).

With the problems and niggles fixed, it seems to work here on my 8040
board (along with dma-coherent):

sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 8GND3R 7.28 GiB
mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit
mmcblk0boot0: mmc0:0001 8GND3R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 8GND3R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 8GND3R partition 3 512 KiB
mmc1: new high speed SDHC card at address 0001
mmcblk1: mmc1:0001 00000 14.6 GiB
 mmcblk1: p1 p2 p3

Thanks.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.