[PATCH v2 renesas/devel 12/13] ARM: dts: r8a7793: Use R-Car Gen 2 fallback binding for iic nodes
flat view
STALE3583d
REVIEWED: 6 (6M)
From: Simon Horman <hidden>
Date: 2016-12-13 11:45:58
Also in:
linux-renesas-soc
Subsystem:
the rest · Maintainer:
Linus Torvalds
1 review trailer.
Use recently added R-Car Gen 2 fallback binding for iic nodes in DT for r8a7793 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7793 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <redacted> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/r8a7793.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index cbe9ac629693..d5114cac656d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi@@ -485,7 +485,8 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
@@ -499,7 +500,8 @@ i2c7: i2c at e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
@@ -513,7 +515,8 @@ i2c8: i2c at e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
--
2.7.0.rc3.207.g0ac5344