From: Simon Horman <hidden> Date: 2016-12-13 11:45:46
Hi,
this short series makes use of newly added R-Car fallback bindings in i2c
and iic nodes of the DTs for SoCs where the drivers in question are already
used.
This should have no run-time effect at this time as the current driver
implementations use the same initialisation squeuences for SoC-specific and
R-Car fallback bindings for all the cases covered by this patch-set.
Based on renesas-devel-20161212-v4.9
Changes since v1:
* s/iii/iic/
* Differentiate subject lines for i2c and iic patches
* Reviewed-by tags from Geert
Simon Horman (13):
ARM: dts: r8a7779: Use R-Car Gen 1 fallback binding for i2c nodes
ARM: dts: r8a7778: Use R-Car Gen 1 fallback binding for i2c nodes
ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for i2c nodes
ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for i2c nodes
ARM: dts: r8a7792: Use R-Car Gen 2 fallback binding for i2c nodes
ARM: dts: r8a7793: Use R-Car Gen 2 fallback binding for i2c nodes
ARM: dts: r8a7794: Use R-Car Gen 2 fallback binding for i2c nodes
arm64: dts: r8a7795: Use R-Car Gen 3 fallback binding for i2c nodes
arm64: dts: r8a7796: Use R-Car Gen 3 fallback binding for i2c nodes
ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for iic nodes
ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for iic nodes
ARM: dts: r8a7793: Use R-Car Gen 2 fallback binding for iic nodes
ARM: dts: r8a7794: Use R-Car Gen 2 fallback binding for iic nodes
arch/arm/boot/dts/r8a7778.dtsi | 8 ++++----
arch/arm/boot/dts/r8a7779.dtsi | 8 ++++----
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++--------
arch/arm/boot/dts/r8a7791.dtsi | 21 ++++++++++++---------
arch/arm/boot/dts/r8a7792.dtsi | 18 ++++++++++++------
arch/arm/boot/dts/r8a7793.dtsi | 21 ++++++++++++---------
arch/arm/boot/dts/r8a7794.dtsi | 18 ++++++++++--------
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 21 ++++++++++++++-------
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 21 ++++++++++++++-------
9 files changed, 94 insertions(+), 62 deletions(-)
--
2.7.0.rc3.207.g0ac5344
From: Simon Horman <hidden> Date: 2016-12-13 11:45:47
Use recently added R-Car Gen 1 fallback binding for i2c nodes in
DT for r8a7779 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7779 and the
fallback binding for R-Car Gen 1.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7779.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:48
Use recently added R-Car Gen 1 fallback binding for i2c nodes in
DT for r8a7778 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7778 and the
fallback binding for R-Car Gen 1.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7778.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:49
Use recently added R-Car Gen 2 fallback binding for i2c nodes in
DT for r8a7790 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7790 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:50
Use recently added R-Car Gen 2 fallback binding for i2c nodes in
DT for r8a7791 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7791 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:51
Use recently added R-Car Gen 2 fallback binding for i2c nodes in
DT for r8a7792 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7792 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7792.dtsi | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:52
Use recently added R-Car Gen 2 fallback binding for i2c nodes in
DT for r8a7793 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7793 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:53
Use recently added R-Car Gen 2 fallback binding for i2c nodes in
DT for r8a7794 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7794 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
@@ -611,7 +611,7 @@/* The memory map in the User's Manual maps the cores to bus numbers */i2c0:i2cate6508000{-compatible="renesas,i2c-r8a7794";+compatible="renesas,i2c-r8a7794","renesas,rcar-gen2-i2c";reg=<00xe650800000x40>;interrupts=<GIC_SPI287IRQ_TYPE_LEVEL_HIGH>;clocks=<&mstp9_clksR8A7794_CLK_I2C0>;
From: Simon Horman <hidden> Date: 2016-12-13 11:45:54
Use recently added R-Car Gen 3 fallback binding for i2c nodes in
DT for r8a7795 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7795 and the
fallback binding for R-Car Gen 3.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:55
Use recently added R-Car Gen 3 fallback binding for i2c nodes in
DT for r8a7796 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7796 and the
fallback binding for R-Car Gen 3.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:56
Use recently added R-Car Gen 2 fallback binding for iic nodes in
DT for r8a7790 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7790 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:57
Use recently added R-Car Gen 2 fallback binding for iic nodes in
DT for r8a7791 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7791 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:58
Use recently added R-Car Gen 2 fallback binding for iic nodes in
DT for r8a7793 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7793 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
From: Simon Horman <hidden> Date: 2016-12-13 11:45:59
Use recently added R-Car Gen 2 fallback binding for iic nodes in
DT for r8a7794 SoC.
This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7794 and the
fallback binding for R-Car Gen 2.
Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
On Tue, Dec 13, 2016 at 12:45:46PM +0100, Simon Horman wrote:
Hi,
this short series makes use of newly added R-Car fallback bindings in i2c
and iic nodes of the DTs for SoCs where the drivers in question are already
used.
This should have no run-time effect at this time as the current driver
implementations use the same initialisation squeuences for SoC-specific and
R-Car fallback bindings for all the cases covered by this patch-set.
Based on renesas-devel-20161212-v4.9