[PATCH v2 1/2] arm64: dts: zx: Fix gic GICR property
From: arnd@arndb.de (Arnd Bergmann)
Date: 2016-12-07 21:44:17
Subsystem:
the rest · Maintainer:
Linus Torvalds
On Wednesday, December 7, 2016 12:34:12 PM CET Olof Johansson wrote:
So, it seems that Arnd didn't apply the old patch to fixes-non-critical, or at least didn't push out after doing it. So, I've done that now, as well as applied the fixup you have above.
My mistake, I forgot to push it out. I checked the other branches now and found two other commits missing in next/fixes-non-critical: arm64: tegra: Add missing Smaug revision arm64: tegra: Add VDD_GPU regulator to Jetson TX1 Both sent by Thierry Reding last Friday. I can add them back on top or you pick them up again if you are already busy doing merges. For the first patch, I had amended the changelog text, this is the version I had. Arnd 8<---------
From 4d0a00060c1cec86f5aab57c814afbfb3e152578 Mon Sep 17 00:00:00 2001
From: Alexandre Courbot <acourbot@nvidia.com>
Date: Fri, 2 Dec 2016 20:57:55 +0100
Subject: [PATCH] arm64: tegra: Add VDD_GPU regulator to Jetson TX1
Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson
TX1 board. This addition allows the GPU to be used provided the
bootloader properly enabled the GPU node.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <redacted>
[as pointed out by Thierry on IRC, nobody has reported a bug
in the field, but using a new bootloader with a .dtb that
has the incorrect data, it will crash on boot]
Fixes: 336f79c7b6d7 ("arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support")
Cc: stable at vger.kernel.org #v4.5+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 5fda583..906fb83 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi@@ -21,6 +21,10 @@ reg = <0x0 0x80000000 0x1 0x0>; }; + gpu at 57000000 { + vdd-supply = <&vdd_gpu>; + }; + /* debug port */ serial at 70006000 { status = "okay";
@@ -291,4 +295,18 @@ clock-frequency = <32768>; }; }; + + regulators { + vdd_gpu: regulator at 100 { + compatible = "pwm-regulator"; + reg = <100>; + pwms = <&pwm 1 4880>; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <1000>; + }; + }; };