[PATCH v6 4/5] ARM: dts: da850-lcdk: add the vga-bridge node
flat view
From: Tomi Valkeinen <hidden>
Date: 2016-12-13 08:47:43
Also in:
dri-devel, linux-devicetree, lkml
Hi, On 12/12/16 15:05, Bartosz Golaszewski wrote:
quoted hunk ↗ jump to hunk
+&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lcdc_out: port at 1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + lcdc_out_vga: endpoint { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + }; + }; + }; +};
This is not correct. LCDC has just one output, so port at 1 doesn't make
sense. It's port at 0. But with just one port, you can leave "ports" away.
And you don't need the port's label for anything, if I'm not mistaken. So:
&lcdc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&lcd_pins>;
port {
lcdc_out_vga: endpoint {
remote-endpoint = <&vga_bridge_in>;
};
};
};
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161213/5ebeac17/attachment.sig>