[PATCH v5 2/2] ARM: dts: add support for Turris Omnia

Hi Uwe,

Am 27.11.2016 um 17:05 schrieb Uwe Kleine-K?nig:

On 11/27/2016 05:00 PM, Andreas F?rber wrote:

quoted

@Uwe: Note that I had already told CZ.NIC's Michal ~two weeks ago that I
have a WIP .dts for the Omnia - looks like no one knows what the other
is doing. :( My branch includes cleanups for 385 .dtsi and bug fixes for
the switch that I am not seeing in your series:

I'm not in contact with a Michal at cz.nic.

Right, but you have a Bedricha in CC from the same company!

Does the switch work in your setup with DSA?

Not really:

omnia:~ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 532
    link/ether d8:58:d7:00:61:70 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 532
    link/ether d8:58:d7:00:61:6e brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 532
    link/ether d8:58:d7:00:61:6f brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.50/24 brd 192.168.1.255 scope global eth2
       valid_lft forever preferred_lft forever
    inet6 2003:86:6702:9f00:da58:d7ff:fe00:616f/64 scope global
mngtmpaddr dynamic
       valid_lft 7050sec preferred_lft 1650sec
    inet6 fe80::da58:d7ff:fe00:616f/64 scope link
       valid_lft forever preferred_lft forever
5: sit0 at NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1
    link/sit 0.0.0.0 brd 0.0.0.0
6: lan0 at eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state
DOWN group default qlen 1000
    link/ether d8:58:d7:00:61:6e brd ff:ff:ff:ff:ff:ff
7: lan1 at eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state
DOWN group default qlen 1000
    link/ether d8:58:d7:00:61:6e brd ff:ff:ff:ff:ff:ff
8: lan2 at eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state
DOWN group default qlen 1000
    link/ether d8:58:d7:00:61:6e brd ff:ff:ff:ff:ff:ff
9: lan3 at eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state
DOWN group default qlen 1000
    link/ether d8:58:d7:00:61:6e brd ff:ff:ff:ff:ff:ff
10: lan4 at eth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state
DOWN group default qlen 1000
    link/ether d8:58:d7:00:61:6e brd ff:ff:ff:ff:ff:ff

I get some interfaces for the switch, but I've not been able to get them
up/usable. Feel free to browse my commits, maybe I'm doing something
stupid - I already tried with and without fixed links, but the driver
seems to use only one of the two cpu links.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)