[PATCH 09/18] arm64: dts: m3ulcb: enable GPIO leds
From: Simon Horman <hidden>
Date: 2016-11-21 12:05:38
Also in:
linux-renesas-soc
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
From: Vladimir Barinov <redacted> This supports GPIO leds on M3ULCB board Signed-off-by: Vladimir Barinov <redacted> Signed-off-by: Simon Horman <redacted> --- arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 96cda59c2698..49162bd488f8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts@@ -30,6 +30,17 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + leds { + compatible = "gpio-leds"; + + led5 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + led6 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + }; }; &extal_clk {
--
2.7.0.rc3.207.g0ac5344