[RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios

On Monday 21 November 2016 10:23 PM, Axel Haslam wrote:

The hawk board VBUS is fixed to a 5v source, and the over
current pin is actually not connected to the SoC.

Do not reseve these gpios for OHCI as they are not related
to usb.

Signed-off-by: Axel Haslam <redacted>

As discussed over the MMC/SD patches, this patch should be based off the
hawkboard schematic, not the LCDK schematic.

Thanks,
Sekhar