[PATCH V4 2/6] clk: tegra: add TEGRA30_CLK_NOR to init table
From: Mirza Krak <hidden>
Date: 2016-11-07 08:31:42
Also in:
linux-clk, linux-devicetree, linux-tegra, lkml
Subsystem:
common clk framework, tegra clock driver, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Peter De Schrijver, Prashant Gaikwad, Linus Torvalds
From: Mirza Krak <redacted> Add TEGRA30_CLK_NOR to init table and set default rate to 127 MHz which is max rate. The maximum rate value of 127 MHz is pulled from the downstream L4T kernel. Signed-off-by: Mirza Krak <redacted> Tested-by: Marcel Ziswiler <redacted> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board Acked-by: Jon Hunter <jonathanh@nvidia.com> --- Changes in v2: - no changes Changes in v3: - Added comment in commit message where I got the maximum rates from. Changes in V4: - no changes drivers/clk/tegra/clk-tegra30.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 8e2db5e..67f1677 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c@@ -1252,6 +1252,7 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA30_CLK_SDMMC1, TEGRA30_CLK_PLL_P, 48000000, 0 }, { TEGRA30_CLK_SDMMC2, TEGRA30_CLK_PLL_P, 48000000, 0 }, { TEGRA30_CLK_SDMMC3, TEGRA30_CLK_PLL_P, 48000000, 0 }, + { TEGRA30_CLK_NOR, TEGRA30_CLK_PLL_P, 127000000, 0 }, { TEGRA30_CLK_PLL_M, TEGRA30_CLK_CLK_MAX, 0, 1 }, { TEGRA30_CLK_PCLK, TEGRA30_CLK_CLK_MAX, 0, 1 }, { TEGRA30_CLK_CSITE, TEGRA30_CLK_CLK_MAX, 0, 1 }, --
2.1.4