[PATCH V3 4/6] ARM: tegra: Add Tegra30 GMI support
From: jonathanh@nvidia.com (Jon Hunter)
Date: 2016-11-03 10:16:10
Also in:
linux-clk, linux-devicetree, linux-tegra, lkml
On 27/10/16 15:01, Mirza Krak wrote:
quoted hunk ↗ jump to hunk
From: Mirza Krak <redacted> Add a device node for the GMI controller found on Tegra30. Signed-off-by: Mirza Krak <redacted> Tested-by: Marcel Ziswiler <redacted> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board --- Changes in v2: - added address-cells, size-cells and ranges properties Changes in v3: - no changes arch/arm/boot/dts/tegra30.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 5030065..bbb1c00 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi@@ -439,6 +439,19 @@ status = "disabled"; }; + gmi at 70009000 { + compatible = "nvidia,tegra30-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x48000000 0x7ffffff>; + clocks = <&tegra_car TEGRA30_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; +
Acked-by: Jon Hunter <jonathanh@nvidia.com> Cheers Jon -- nvpublic