[PATCH v2 3/6] Documentation: devicetree: net: add NS2 bindings to amac
From: robh@kernel.org (Rob Herring)
Date: 2016-10-31 06:20:40
Also in:
linux-devicetree, lkml, netdev
On Fri, Oct 28, 2016 at 04:56:56PM -0400, Jon Mason wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Jon Mason <redacted> --- Documentation/devicetree/bindings/net/brcm,amac.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ba5ecc1..f2b194e 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt@@ -2,11 +2,12 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings ------------------------------------------------------------- Required properties: - - compatible: "brcm,amac" or "brcm,nsp-amac" + - compatible: "brcm,amac", "brcm,nsp-amac", or "brcm,ns2-amac"
One per line is preferred.
- reg: Address and length of the GMAC registers, Address and length of the GMAC IDM registers + Address and length of the NIC Port Manager registers (optional) - reg-names: Names of the registers. Must have both "amac_base" and - "idm_base" + "idm_base". "nicpm_base" is optional (required for NS2)
Is nicpm_base optional on some SoCs? If not just say which ones it applies to. A separate line will make that clearer. _base is kind of redundant too, but it's already done.
- interrupts: Interrupt number Optional properties: -- 2.7.4